Tools That Think
4 courses, in the order they are meant to be taken. You can start anywhere, and they build.
How to read the course codes
- -00 means start here.
- -01, -02 are steps on one path, in order.
- A letter (-T1, -P2) marks a track. Tracks run in parallel: take any track you like, in any order, without taking the others.
- -99 is the capstone. Take it last.
The path
- TOOLS-01
Map and Compass: Finding Your Way on Land
Step 1 on the single path through this series.
Learn to find your way on land with a printed topographic map and a baseplate compass, and to say what a GPS adds to each step. The course reads the map's margin, scale, symbols and contour lines until you can picture the ground and measure distance and height on it; says where a place is in latitude and longitude and in the UTM grid, and how precise each grid reference is; takes and follows a bearing and corrects for magnetic declination in either direction without a sign error; finds your position from landmarks, a pace count and the shape of the land; plans a route on paper, including at night and on difficult ground; and ends with how GPS finds you, where it fails, and how to put its fix on the paper map. It is built from two public documents read side by side, the Army's 2001 field manual and the National Wildfire Coordinating Group's land navigation workbook, and it says plainly where they disagree. One lesson names places near Indianapolis to practice and the rules that apply at each. It is not a search-and-rescue course, wilderness first aid, or a safety qualification, and every lesson that needs a qualified reviewer or a demonstration says so at the top. The first course in the Tools That Think series.
- TOOLS-02
The Slide Rule
Step 2 on the single path through this series.
Learn to multiply, divide, square, take square roots and read common logarithms on a basic Mannheim-type slide rule, to place the decimal point by estimating first, and to say how many figures an answer is good for. The course starts with why it works (every number sits at a distance from 1 proportional to its logarithm, so sliding one length along another adds logarithms, and adding logarithms multiplies), has you build a paper rule, and teaches what to look for in a rule of your own. Then it goes back to what came before and after: Napier's rods and his 1614 table, Briggs's base-10 logarithms, printed log tables and the human computers who made them, Gunter's line of numbers, the Oughtred and Delamain dispute read from both men's own words, Mannheim's runner, slide rules at Langley and on Apollo (and what they were not used for), the handheld calculator that ended the era, nomograms, circular rules and the pilot's E6B. Every worked example comes from public-domain sources (two slide-rule manuals of 1920, a 1918 MIT text on graphical computation, a 1964 federal handbook of tables and the FAA's pilot handbook) or is plain arithmetic shown in the lesson. Trigonometric and log-log scales are named but not taught. The second course in the Tools That Think series.
- TOOLS-03
Surveying: How Land Gets Measured
Step 3 on the single path through this series.
Measure land by hand the way the public land surveys were made. Pace a line and calibrate your own step; run a line with a Gunter's chain of 66 feet and 100 links; take a bearing with a surveyor's compass, correct it for magnetic declination, and catch local attraction by sighting from both ends; run a level line from backsights and foresights; and compute an area from chains, from the coordinates of the corners, and with a polar planimeter. Every method is taught from the federal Manual of Surveying Instructions and two public-domain surveying textbooks, with the history of how the first lines were run in Ohio and Indiana and what went wrong with them. A lesson on what to look for in each tool comes first. It does not make anyone a surveyor and never tells a learner where a property line is: reading land descriptions, and the law that grew around the old corners, is the companion course, Reading a Land Description. The third course in the Tools That Think series.
- TOOLS-04
Reading a Land Description: The Grid, the Deed and Indiana
Step 4 on the single path through this series.
Learn to read the words that describe land. Read the Land Ordinance of 1785 as a primary source, then the grid it created: principal meridians, base lines, townships, ranges and the 36 sections, and the aliquot parts and lots of a legal description such as SW1/4NE1/4. Learn why the corners the original surveyors set stand as the true corners, errors and all; read a metes-and-bounds deed, from a 1775 purchase from eleven Piankeshaw chiefs bounded in leagues along the Wabash to a modern lot and block; and use a checklist of what to look for in any description. Then find the survey under Indiana: the Ohio River base, the First and Second Principal Meridians, Freeman's lines around the Vincennes Tract, the cessions the surveys followed, the section-line grid under the state's roads, and the archives and county surveyors that keep the records. Taught from the federal Manual of Surveying Instructions, the Bureau of Land Management's own history and specifications, and the original documents. It does not make anyone a surveyor, gives no legal advice, and never tells a learner where a property line is. The fourth course in the Tools That Think series, and the companion to Surveying: How Land Gets Measured.